|
Future Research
The mind is more than a terrible thing to waste, it's criminal to deny the Human race it's potential.
This area I set aside for sharing with visitors on proposed future projects, also Brainstorming theories and logic.
Also I am thinking on allowing others to post their devices , proven work on the site so all can enjoy/use it, drop me a line if you think this is what you want.
The project on "GEO-STRESS" seems to be going well , but some feedback would be appreciated . The aim is to make a rough scalable map for the Amateur , for determining likely geo-stress on natural satellites, and planetary bodies by their rotation and orbit, and probable "events".
Some time ago I was fortunate enough to take part in some experiments with centrifugal mechanics, and some interesting findings came to light, one of which is natural rotation as a conservation of energy, if not allowed, then undue stress is placed on the body of the orbital body. I can guesstimate the probable best rough measurements, but would rather have input from more credible researchers, as the finished product would be map using orbit, rotation, distance from host to determine quake activity, and likely generated heat index. As the Earth , and known other bodies are facts , that can be used as a base measurement. It should be fun to put together.
Another area (I am getting to it soon) to be explored , is causing visible light to be stored , same as infrared , as they , though classified as the same type of phenomenon , behave in completely different ways , some experiments years ago by myself , showed there was some near instantaneous reemission of visible light by plants, it may very well be possible to synthesize certain compounds to "Store" light, like happens to infrared, and be reemitted in normal form , an exciting prospect.( I used a contained focus device like a flashlight, that used an old fashioned large Flashbulb, it was configured to aid itself when excited, and get a near instantaneous "Burn" , much faster than a normal flash as all the light and heat was concentrated around the bulb to enhance the effect, it was crude , but effective, as I could hold the spread to under 20 ft at 1/4 mile, which allowed some interesting experiments, due to the intensity, aptly described by some as a bomb without the bang, ha,ha.
Please bear with me, as it's difficult to evade the pitfalls of crossing into areas , that are the theoretical arena of folks , in which , I have no business questioning, or lecturing on Celestial Mechanics.
Particle Mechanics 
You might try the strange effects of the research I did on a specialized antenna, as it leads into particle mechanics , and electron manipulation, you will have to put up with a few ads here as the link is to one of the pages on the Amateur Radio site I maintain for my club, and that site is supported by Ads from the Host, there are specific experiments , and suggested directions there toward recombining broken electro-particle-magnetics into their primary structure, a reversal of chaos http://www.fortunecity.com/meltingpot/portugal/1198/theory.htm
You will find the specs for the antenna on the Amateur site
Addendum to Particle Mechanics 
The material has to be dug into, as what really happened is the basic matrix of the "Legs" was altered, and directly resisted the 2 Meter signal applied after used for a while, and while configured as it was, continued to degrade , if that word is applicable , as I had concerns of basic instability of the metal itself. I found that if a high frequency signal was applied , it was resisted , this is without showing any difference in the DC relationship, as I wasn't into a filter at the time, I did not see then just how it could be applied, but now I see where a solid conductor, with little or no resistance, that suppressed hi frequency without inductance , or capacitance or resistance, just might be desirable later on. The reasoning here is if it can be made to resist, it can be made to do the opposite.
Addendum 2 
Perhaps it's best to simply build the Antenna, cut for 2 meter, using the copper clad welding rod ( with a soft steel center) "legs", using the original materials I used, which was galvanized tin for the plane, and ordinary solder tin ,lead combo from Radio Shack. The degradation will be apparent after using it for a week, and after a month it becomes really noticeable (unusable after a couple months), but if your results are the same as mine, using it for a day will start the process, and strangely, the degradation will progress at about the same rate, a little faster if using it.
Those of you who are Amateur Radio operators will appreciate the high gain of this configuration, and that was my motivator in the beginning. I want to particularly point out the strange crossover that occurs when lowering the frequency, as the configuration alters it's behavior dramatically, hence my assumption that sinusoidal waves can't generate the harmonics in the metal to allow the hi-gain associated with the "plane" type, showing the higher frequencies are acting like square waves in "ringing effect" (Not to worry, this configuration contains the ringing to enhance the primary signal), also the breakdown is reduced or eliminated ,using low frequencies in a ring type antenna explained on the link to the Amateur site.
----------------------------
NOTE: If you haven't gotten your Amateur License, then you are missing a valuable tool for science, as you can operate in frequencies that are not allowed to normal civilian stations, it's annoying to have to get permissions to use local "Clean bands" and most times requires an operator as well, as most Countries recognize international rules associated with it.
----------------------------
I was particularly interested in the scrapped "Legs" I had used, to see why they failed, some experimentation showed they could not be used in high frequency again, which prompted a flurry of phone calls to those who were into particle mechanics at one time, and derived my assumption of magnetic pairing, as there is no other explanation that can account for the electrical resistance to the 146 MHz signal in a good copper conductor, not accounted for by the steel inside, rather some bizarre mix, or lack of a component stripped away. This would account for the bleed-off of the harmonics generated in the plane. I am not a Particle Physicist, and abandoned the project to allow me time to find a way to present it to those who could understand the phenomenon better, and find a use for it.
A learned friend of mine once stated, ""you can't alter the Laws of Physics, BUT you can alter it's parameters, and make it behave in a manner not seen before."" I hope some of you can find a use for this interesting phenomenon.
I placed some material on a "Shield" that I want cooperative research effort done on, to let the visitors help resolve the basic setup , making future shuttle flights a little safer for "vacuum visitors" (A little tongue in cheek here , ha , ha) go to Electro Shield
|